How To Clean Car Headlights – 100% Working Ways & Tips!!!
Introduction:
Maintaining clean and clear car headlights is crucial for safe driving, as they play a vital role in illuminating the road during night drives. Over time, headlights can become dirty, cloudy, or turn yellow, affecting their efficiency. In this blog, we'll explore some effective and easy DIY methods to clean car headlights at home, ensuring optimal visibility and safety on the road.
Why Do We Need to Keep Headlights Clean?
Clean headlights are essential for safety, as even a thin layer of particles on the plastic covering can reduce light output, leading to potential accidents during night driving.
DIY – How to Clean Yellow Headlights:
Yellowed headlights are a common issue, often caused by prolonged exposure to sunlight. To address this problem, you can use a simple home remedy – toothpaste!
1. Apply a small amount of toothpaste to the yellowed parts of the headlight cover using a soft cloth.
2. Gently rub the toothpaste with an old toothbrush in circular motions for about fifteen seconds.
3. Rinse off the toothpaste with clean water using a wet cloth to reveal clean and clear headlights.
DIY: How to Clean Oxidised Headlights:
Headlights are typically made of polycarbonate plastic, which can oxidize over time due to exposure to sunlight. This oxidation can make the headlamps blurry.
1. Start by cleaning the headlamps with a moist cloth to remove loose dust particles.
2. Apply toothpaste to the plastic headlamp using a soft cloth.
3. Rub the toothpaste gently in circular motions to remove oxidation.
4. After a few minutes, wipe off the toothpaste with a clean, dry cloth.
Alternatively, you can use WD40 to reverse the oxidation process:
1. Clean the headlights with a cloth wetted with a soap solution.
2. After ten minutes, spray WD40 on the headlights.
3. Wait for five minutes, then wipe off the WD40 with a clean, dry cloth.
Cleaning Headlights – DIY with Sandpaper:
Cleaning car headlights with sandpaper might sound unusual, but it's an effective method for extremely cloudy headlights.
1. Choose sandpaper with a grit number suitable for the level of cloudiness. 400-grit sandpaper works for heavily cloudy headlights, while 600-grit is suitable for moderately cloudy headlights.
2. Protect the car's exterior paint by applying masking tape around the headlamp.
3. Wet the headlight and the sandpaper with water to act as a lubricant.
4. Lightly sand the headlights in horizontal motions for five to ten minutes.
5. Clean off the headlamps with water and tissues to remove plastic particles.
Optional: For better results, use even finer sandpaper (above 1200 grit) and repeat the process.
Cleaning Headlights – DIY with Vinegar + Baking Soda:
For a cost-effective solution to clean car headlights, you can use vinegar and baking soda.
1. Clean the headlamp with a soft cloth to remove dust.
2. Dilute two to three tablespoons of liquid soap in water and clean the headlight thoroughly.
3. Mix one tablespoon of vinegar with one and a half tablespoons of baking soda to form a thick paste.
4. Apply the paste to the plastic covering of the headlight in circular motions using a dry cloth.
5. Let it sit for one to two minutes, then rinse off with clean water.
Conclusion:
Regularly cleaning and maintaining your car headlights using these DIY methods will ensure optimal visibility and safety during night drives. Keeping your headlights clean will not only improve their efficiency but also contribute to maintaining the overall appearance and value of your car.
What Is Accounting? | Top 10 Hospitals in Delhi | Varanasi Tour Package | Varanasi Photography | Best Classified Site for Enquiries | Top Auto Parts Dealers in India
No comments: